Bosch - Seite 125 - Qualität zu günstigen Preisen

Bosch STIKSAVKLINGESÆT U-SKAFT 3STK PROGRESSOR

Die Klingen des Sets sind für Stichsägen mit einem universellen Schaftsystem konzipiert. Das 3-teilige Progressor-Stichsägeblatt-Set bietet kraftvolle Schnitte in dünnen und dicken Materialien. Die Progressor-Klingen des Sets sind für den universellen Einsatz geeignet und schneiden schnell durch Holz, Kunststoff und Metall mit einer Vielzahl von Dichten.
Stichsägeblatt-Set mit 3 Teilen
Universal und schnell durch dick und dünn.
Für Holz, Kunststoff und Metall

11,25 € (9,45 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BETONBORSÆT SILVER PERC ROBUSTLINE 5 STK

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Robust Line Concrete Drill Bit Set CYL-3 with 5 pieces

13,65 € (11,47 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch GROVMUNDSTYKKE TIL GAS 18V-10

10,20 € (8,57 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch RØR TIL GAS 18V-1/EASY VAC 12 2STK

Der Staubsaugerschlauch ist für Bosch-Staubsauger gedacht.
Schlauch

11,11 € (9,34 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BESKYTTELSESSKÆRM M/DÆKPL 125MM GWS 9

Klick-System zum sicheren Verriegeln. Die Haube passt auf Winkelschleifer. Der Schutzschirm ist für allgemeine Schrupp- und Schleifarbeiten konzipiert und mit einer Abdeckplatte zum Schneiden ausgestattet

15,59 € (13,10 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SPÆNDEMØTRIK TIL BAGSKIVE M14X1.5MM

Zum Befestigen von Polierscheiben
Runde Mutter mit M 14x1,5 Feingewinde

8,07 € (6,78 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 4.9MM 10STK

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Pack of 10 pieces.

9,94 € (8,35 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 7.2MM 10STK

HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The design of the PointTeQ tip ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Pack of 10.

15,97 € (13,42 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SPIRALBOR 7X100X160MM SEKSKANTSKAFT

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

9,15 € (7,69 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SPIRALBOR 20X100X160MM SEKSKANTSKAFT

15,55 € (13,07 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 1X34MM 10 STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

11,34 € (9,53 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 2.5X57MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

12,26 € (10,30 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-G DIN 340 9X115MM

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package contains one piece.

11,59 € (9,74 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SLIBEBLAD 150 SIC K320 5 STK

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. In addition, the electrostatic, open surface with spaces between the grains ensures uniform dust removal, preventing clogging. The sanding roll is developed for grinding hard materials such as stone and composite material as well as intermediate sanding in painting work. It is also suitable for sanding and grinding of varnish, paint, primer, putty and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion on the subject or machine. The abrasive grain is attached using a fully synthetic resin bond ensuring exceptional durability in tough tasks. The product's backing material is F/C paper to optimize its sanding properties.F355 Best for Coatings & Composites fits all common belt sander machines.
Package of 5 pieces.

9,27 € (7,79 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SLIBEBLAD 115X230MM K120 10 STK

Schleifpapier

11,99 € (10,08 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SLIBEBÅND 75X610MM K80 3STK

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality tape joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planar grinding of grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint abrasive belt fits belt sanders.
Package of 3 pieces.

9,52 € (8,00 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch POLERFILTSÆT 2 STK GROV/MELLEM PSM 160

Reinigungsset mit 2 Teilen.

12,47 € (10,48 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch POLERFILT BLØD

It is intended for use on planers. The polishing pad is intended for pre-polishing dirty or scratched lacquered surfaces using polish or abrasive paste

7,80 € (6,56 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch STÅLKOPBØRSTE 50MM NYLON

The cup nylon brush provides a good, fine finish on various materials without damaging the surface. It is equipped with K80 aluminum oxide-coated nylon bristles that perfectly conform to the contours of the object. The abrasive coating continuously releases abrasive grains during use, ensuring consistent material removal. This cup nylon brush is suitable for cleaning tasks such as removing rust from small to medium-sized metal surfaces. It is also suitable for sanding paint, smoothing, matte sanding and cleaning metal, PVC and wood. It can also be used for texturing wood. The brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish while thinner wires provide finer, smoother surface results. It is designed for use with drills with a 6 mm shaft.
Cup steel brush - nylon wire with corundum abrasive K80
Suitable for removing paint, removing rust, smoothing out surfaces and cleaning wood, metal and PVC on smaller to medium-sized areas; texturing wood.
Perfectly adapts to the outline of the object without significantly changing its surface.
Works with constant breakdown effect as abrasives are constantly released during use.

12,91 € (10,85 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FRÆSER NOT 2 SKÆR HM 8MM L 20MM B 7 M

Es ist geeignet für den Einsatz mit tragbaren Handfräsen, Tischmontage-Portalfräsen und CNC. Der Wood Straight-bore-Kopf sorgt für optimales Schneiden bei gängigen Fräsarbeiten. Langlebigkeit und zuverlässige Schneideergebnisse werden durch hochwertige Wolframkarbid-Schneider erreicht. Darüber hinaus verhindert der Bohrkopf ein Zurückschnappen, indem er die Dicke der erzeugten Späne begrenzt. Es ist zur Fräsung von Nuten, Verbindungen, Kerben und Federzinken in weichem und hartem Massivholz sowie Verbundwerkstoffen vorgesehen

14,37 € (12,08 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 5.4MM 10 STK

10,33 € (8,68 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SLIBEBLAD DELTA 93MM K320 6H 50 STK

Bosch Expert C470 schleifpapier

16,64 € (13,98 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FLADFRÃ†SEBOR SELFCUT 18X400MM

Bohrer, für Spanplatte, Weichholz, Spanplatte, Forstnerbohrer, 18 mm, Inbus, Länge: 400 mm

12,66 € (10,64 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FLADFRÃ†SEBOR SELFCUT 19X400MM

Bohrer, für Spanplatte, Weichholz, Spanplatte, Forstnerbohrer, 19 mm, Inbus, Länge: 400 mm

10,66 € (8,96 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FLADFRÃ†SEBOR SELFCUT 10X400MM

Bohrer, für Spanplatte, Weichholz, Spanplatte, Forstnerbohrer, 10 mm, Inbus, Länge: 400 mm

9,74 € (8,19 €)

Verfügbar - 6-8 Werktage Lieferzeit

Montag - Freitag:	09:00 - 15:00 Uhr
Samstag, Sonntag & dänischen Feiertagen:	Geschlossen