Bosch Bohrer & Bits - Seite 33

Bohrer, für Beton, Mauerwerk, Kalkstein, 45 mm, SDS-max, Länge: 1000 mm

Bosch 2608690099

Details:
- Diameter mm: 121
- Diameter inches: 4 3/4
- Working length: 38mm

Chuck key, 6 mm, length: 110 mm

Der HSS-Spiralbohrer mit PointTeQ ermöglicht schnelles Bohren in Metall dank des Designs der Spitze mit PointTeQ. Das Ansetzen zum Bohren ist schnell und einfach, da die selbstzentrierende Spitze ein Wandern verhindert. Durch die erhöhte Bohrgeschwindigkeit entsteht weniger Hitze und Verschleiß. Das PointTeQ-Spitzen-Design sorgt dafür, dass es scharf bleibt und eine lange Lebensdauer hat. Dieser Bohrer eignet sich zum Bohren in legiertem und unlegiertem Stahl, Nichteisenmetallen, Gusseisen und Kunststoffen. Es besteht ein geringes Risiko von Brüchen, insbesondere bei Bohrern mit einem Durchmesser unter 6 mm, da sie einen extrem flexiblen Kern haben. Die schwarze Oxidbeschichtung gewährleistet eine schnelle Spanabfuhr. Der HSS-PointTeQ-Spiralbohrer wird gemäß DIN 338 hergestellt Standards.Die Drillart ist N (Winkel der Flöte) mit einem Punktewinkel von 135 Grad.Es hat ein zylindrisches Schaftsystem (der Schaft hat den gleichen Durchmesser wie Hammerbohrer)und ist für den Einsatz in Säulenbohrmaschinen oder Schraubendrehern vorgesehen.
Packung mit 10 Stücken.

Lochsäge, für Ziegelsteine, Spanplatte, Weichholz, glasfaserverstärkter Kunststoff, weiche Fliesen, 51 mm

Knarrenschraubendreher mit Bit-Satz, 38 Stücke, in Tragetasche

Schraubendreher- und Bohrer-Bitsatz, für Holz, Metall, Stein, torx, phillips, pozidriv, hex, slot, Länge: 50 mm, 25 mm

Bohrersatz, für Beton, 5 Stücke, 5 mm, 6 mm, 7 mm, 8 mm, 5.5 mm, Länge: 85 mm, 100 mm, 120 mm

Bohrer, für Beton, Mauerwerk, 10 Stücke, 5.5 mm, SDS-plus, Länge: 115 mm

Bohrer, für Beton, Schneiden von Bewehrungsstahl, 32 mm, SDS-plus, Länge: 300 mm

Schraubenzieher und Bohrer-Set, für Holz, Metall, Beton, 91 Teile

Bohrer, für Metall, Spiralbohrer, 10 Stücke, 2 mm, Inbus, Länge: 60 mm

The drill chuck with key is a simple and secure solution for attaching drills to all tasks. With uniform clamping force for secure attachment of drills with cylindrical or hexagonal shank. The jaws are easily tightened and loosened with a key, which provides easy handling. Drill chucks with keys are available in different holders (1/2" - 20, 3/8" - 24, 5/8" - 16, B16 and SDS plus) for a wide range of capacities and are compatible with most common drills. See the technical information to learn more about impact resistance or suitability for counterclockwise rotation.
Hammer-resistant design

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Robust Line Concrete Drill Bit Set CYL-3 with 5 pieces

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The drill head's exposed 135-degree two-part self-centering tip combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in boring stands and screwdrivers
Package with one piece.

Holzbohrer-Set mit drei Größen (6.0, 8.0 und 10.0 mm) und zylindrischem Schaft zum Bohren in Holzwerkstoffen.

Bosch 3-piece Wood Drill Bit Set enthält Bohrer für den Einsatz in Hart-/Massivholz, Weichholz und Akustikplatten und bietet eine kleine, praktische Auswahl für gängige Holzbohrarbeiten.

Holzspiralbohrer mit Sechskantschaft, 25.0 mm Durchmesser und 170 mm Arbeitslänge zum Bohren in Holz, einschließlich Weichholz und Akustikplatten.

Bosch Wood Spiral Drill Bit, Hex kombiniert einen 11 mm Schaftdurchmesser mit einer 235 mm Gesamtlänge, um stabiles Bohren und kontrollierte Tiefe bei der Arbeit mit holzbasierten Materialien zu unterstützen.

Drill bit, for concrete, masonry, limestone, reinforced concrete, 38 mm, SDS-max, length: 720 mm

Bohrer, für Holz, Brad-Point-Bohrer, 12 mm, Länge: 140 mm

Router-Bit für Holz, Römischer Bogen, 42,9 mm, Länge: 60 mm, Breite: 15,1 mm