Connector BSMB-10/35; 10-35mm2

- For multicore cables of up to 5 cores- 5 sector spacers for proper centring of five-core connection- Complete with screw connectors- For straight and branch connections, including armoured cable- For all types of application, including submersible- Re-accessible and with no shelf life- Flame retardant- Non toxic and safe- m/klem(5x2,5-10mm2)-IP68

For All Conductor Types – WAGO‘s 221 Series COMPACT Splicing Connectors in a Set

Terminal for power measurement, in accordance with the “fællesregulativet", with 2 A- circuit breaker characteristic D, with cover, with closed short-circuit bridges. Length: 220 mm Hole spacing: 206mm Hole: 7mm ø

DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715: 2001, material: Steel, galvanized, length: 2000 mm, Hole size: 5.2 mm x 18 mm, color: silver

Thermal shrink tubes

Thermal shrink tubes

Fuse terminal block with LED for mounting on NS 35, for miniature circuit breakers, terminal width: 8.2 mm, color: Black

Plastic cable marker, without tie, labeling with insert strips ESL..., EST... or large format ES/LP-BW-GB, attachment with cable binder WT, lettering field size: 29 x 8 mm

COMPACT PUSH WIRE® connector for junction boxes, 5-conductor terminal block, Colour: gray

For Everyday Challenges – WAGO‘s 221 4mm2 and 221 6mm2 Series Connectors in a Set

MDT-AF is a mediumwall Polyolefin heatshrink tubing with hot melt adhesive. Shrink ratio is up to 4:1, min. shrink temperature is 135°C, operating temperature is -55°C to +130°C. Flame retardant - self extinguishing. Good chemical resistance. IP 68 sealing

W-Series, PE terminal, Rated cross-section: 35 mm2, Screw connection, Screwed

3M Brand PST Cold Shrink Connector Insulators are a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides orsulphurs. Six diameter sizes will cover a range of 1000 volt cables, copper and aluminium conductors.

Installation connectors from wago in a Sortimo box

SAK Series, PE terminal, Rated cross-section: 10 mm2, Screw connection, PA 66, green / yellow,

MDT-AF is a mediumwall Polyolefin heatshrink tubing with hot melt adhesive. Shrink ratio is up to 4:1, min. shrink temperature is 135°C, operating temperature is -55°C to +130°C. Flame retardant - self extinguishing. Good chemical resistance. IP 68 sealing

Feed-through terminal block, Connection method: Screw connection, Cross section: 0.14 mm2 - 4 mm2, AWG: 26 - 12, Width: 5.2 mm, Color: blue, Mounting type: NS 35/7,5, NS 35/15

Feed-through terminal A2T 2.5 beige Wemid with 4 PUSH IN terminals on double-tier (2x2) for 0.5-2.5mm2 800V / 24A

NS 35 DIN rail, according to customer specifications, perforated, height: 7,5 mm, width: 35 mm

Flat bracket, with M6 screw, for fixing DIN rails 12 mm above the mounting surface

- Ready to use! No mixing required!Already cross-linked! No need to wait!- Resolve issues connected to incorrect insulation or sealing- Eliminate annoying out of service instances caused by moisture- Protect your systems from the penetration of insects- Protect your electrical connections from oxidation and corrosion

Feed-through terminal A3T 2.5 beige Wemid with 6 PUSH IN terminals on 3-tier (3x2 terminals) for 0.5-2.5mm2 800V / 22A

Accessories, 50 pcs.

Feed-through terminal block, Connection method: Screw connection, Cross section: 0.14 mm2 - 4 mm2, AWG: 26 - 12, Width: 5.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15