Viega Alu pex Systeme

Viega Raxofix T-piece 16 x 1/2" x 16 mm gunmetal

Raxofix T-Stück mit SC-Contur-Siliciumbronze-Presseanschlüssen, Rp-Gewinde d1: 16, Rp: 12, d2: 16

19,00 € (15,97 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix bend 90° 25 gunmetal / glossy

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

14,51 € (12,19 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix connection screw 16 x 3/4" gunmetal 646417

Raxofix Verbindungsschraubfitting mit SC-Contur- Siliziumbronze- Pressanschluss, G-Gewinde- Flachdichtungskomponenten EPDM-Dichtelement d: 16, G: 34

10,12 € (8,50 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix transition 16 x 1/2" socket/socket gunmetal

Raxofix Adapter mit SC-Contur-Silicium-Bronze-Pressanschluss, Rp-Gewinde: 16, Rp: 12

10,77 € (9,05 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix coupling 16 mm gunmetal

Raxofix-Kupplung mit SC-Contur-Siliziumbronze - Pressverbindung d1: 16, d2: 16

8,32 € (6,99 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix coupling 20 x 16 mm gunmetal

Raxofix-Kupplung mit SC-Contur-Siliziumbronze-Presseanschluss d1: 20, d2: 16

9,07 € (7,62 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix T-piece 25 x 16 x 20 mm gunmetal

Raxofix T-Stück mit SC-Contur- Siliziumbronze-Pressverbindern d1: 25, d2: 16, d3: 20

20,01 € (16,82 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix transition 16 x 1/2" sleeve/nipple gunmetal

Raxofix Adapter mit SC-Contur-Siliziumbronze-Pressanschluss, R-Gewinde: 16, R: 12

10,49 € (8,82 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix T-piece 16 mm gunmetal

Raxofix T-Stück mit SC-Contur- Siliciumbronze-Pressverbindern d1: 16, d2: 16, d3: 16

12,43 € (10,45 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix T-piece 20 x 1/2" x 20 mm gunmetal

Raxofix T-Stück mit SC-Contur-Siliciumbronze-Presseanschlüssen, Rp-Gewinde d1: 20, Rp: 12, d2: 20

19,22 € (16,15 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix connection screw 16 x 3/4" gunmetal 647865

Raxofix Verbindungsschraubfitting mit SC-Contur für Verteiler aus Siliziumbronze mit Pressanschluss, Viega Steckplatz: 16, G: 34

9,15 € (7,69 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix T-piece 25 x 20 x 25 mm gunmetal

Raxofix T-Stück mit SC-Contur- Siliciumbronze-Pressverbindern d1: 25, d2: 20, d3: 25

18,35 € (15,42 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix coupling 25 x 20 mm gunmetal

Raxofix-Kupplung mit SC-Contur-Siliziumbronze-Presseanschluss d1: 25, d2: 20

12,17 € (10,23 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix T-piece 40 x 3/4" x 40 mm gunmetal

Raxofix T-piece with SC-Contur- silicium bronze- press connectors, Rp-threadd1: 40, Rp: 34, d2: 40

48,09 € (40,41 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix T-piece 25 x 3/4" x 25 mm gunmetal

Raxofix T-piece with SC-Contur- silicium bronze- press connectors, Rp-threadd1: 25, Rp: 34, d2: 25

25,37 € (21,32 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix T-piece 40 mm gunmetal

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 40, d2: 40, d3: 40

50,80 € (42,69 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix T-piece 40 x 32 x 40 mm gunmetal

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 40, d2: 32, d3: 40

44,83 € (37,67 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix T-piece 25 mm gunmetal

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 25, d3: 25

19,21 € (16,14 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix adapter elbow 90° 32 x 1 female/male

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 32, R: 1

30,20 € (25,38 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix transition bend 90° 32 x 1" socket/socket gunmetal

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, Rp-threadd: 32, Rp: 1

26,00 € (21,85 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix coupling 40 mm gunmetal

Raxofix Coupling with SC-Contur- Silicium bronze - press connection d1: 40, d2: 40

27,51 € (23,12 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix bend 90° 32 gunmetal / glossy

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

20,66 € (17,36 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix T-piece 25 x 16 x 16 mm gunmetal

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 16, d3: 16

22,26 € (18,71 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix T-piece 20 x 16 x 20 mm gunmetal

Raxofix T-Stück mit SC-Contur- Siliciumbronze-Pressverbindern d1: 20, d2: 16, d3: 20

15,58 € (13,09 €)

Verfügbar - 2-4 Werktage Lieferzeit

Viega Raxofix transition 20 x 18 mm gunmetal

Raxofix Adapter with SC-Contur- for all Viega metallic systems- silicium bronze- press connectorsComponentsEPDM sealing elementd1: 20, d2: 18

13,97 € (11,74 €)

Verfügbar - 2-4 Werktage Lieferzeit

Montag - Freitag:	09:00 - 15:00 Uhr
Samstag, Sonntag & dänischen Feiertagen:	Geschlossen

Viega Alu pex Systeme - Seite 2

Viega Raxofix T-piece 16 x 1/2" x 16 mm gunmetal

Viega Raxofix bend 90° 25 gunmetal / glossy

Viega Raxofix connection screw 16 x 3/4" gunmetal 646417

Viega Raxofix transition 16 x 1/2" socket/socket gunmetal

Viega Raxofix coupling 16 mm gunmetal

Viega Raxofix coupling 20 x 16 mm gunmetal

Viega Raxofix T-piece 25 x 16 x 20 mm gunmetal

Viega Raxofix transition 16 x 1/2" sleeve/nipple gunmetal

Viega Raxofix T-piece 16 mm gunmetal

Viega Raxofix T-piece 20 x 1/2" x 20 mm gunmetal

Viega Raxofix connection screw 16 x 3/4" gunmetal 647865

Viega Raxofix T-piece 25 x 20 x 25 mm gunmetal

Viega Raxofix coupling 25 x 20 mm gunmetal

Viega Raxofix T-piece 40 x 3/4" x 40 mm gunmetal

Viega Raxofix T-piece 25 x 3/4" x 25 mm gunmetal

Viega Raxofix T-piece 40 mm gunmetal

Viega Raxofix T-piece 40 x 32 x 40 mm gunmetal

Viega Raxofix T-piece 25 mm gunmetal

Viega Raxofix adapter elbow 90° 32 x 1 female/male

Viega Raxofix transition bend 90° 32 x 1" socket/socket gunmetal

Viega Raxofix coupling 40 mm gunmetal

Viega Raxofix bend 90° 32 gunmetal / glossy

Viega Raxofix T-piece 25 x 16 x 16 mm gunmetal

Viega Raxofix T-piece 20 x 16 x 20 mm gunmetal

Viega Raxofix transition 20 x 18 mm gunmetal