System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

HKF1-11 Auxiliary contact 1NO/1NC, for manual motor starter MS116, MS/MO132, MS/MO165 , front mounting

MS116-1.6 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 1.6 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

Stromzähler, 3-Phasen, aktive Energie Kl. 1 & B, zugelassen nach: IEC 62052-11, IEC 62053-21, EN 50470-1, EN 50470-3

Kabelverteilerschrank PK20 mit Plastiktür

Cable bracket diameter 12 - 16 mm

Fuse switch disconnector 400/1000A DIN2 for busbar 1000A excl . clamps

ABB Sicherungs-Lasttrennschalter

GERADES FITTING FÜR KABELKANÄLE PAFS - FESTES EXTERNES GEWINDE ZUR EINFÜHRUNG IN GEWINDEEINGÄNGE UND AUSBRÜCHE. MATERIAL: PA (NYLON) 66

Die RCCBs F200 Serie sorgt dafür, dass Menschen und Installationen gegen Fehlerströme zur Erde geschützt sind. Ein großes Angebot an Standard-Sofort- und Selektiv-AC- und A-Typen wird durch einige Konfigurationen für spezielle Anwendungen ergänzt.

MS116-1.0 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 1.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

Anschluss

Feuchtigkeitssperre für Flexi-Line 1500 Produktbeschreibung: Entwickelt, um zu verhindern, dass Feuchtigkeit vom Boden in den Schrank aufsteigt und um Kondensation, Korrosion, Kurzschlüsse und andere Folgeschäden am Schrank zu vermeiden. Technische Spezifikationen: Farbe: Grau.

Terminalabdeckung für OT16...40F3, -FT3, 3-polige Abdeckung, transparent.

Wählschaltergriff. Anzeige I-O und AN-AUS. Keine separate Welle erforderlich. Mit max. 3 Vorhängeschlössern abschließbar, IP 65, Lochabstand 36/48 mm, NEMA 1, 3R, 12, schwarz, OT16...125FT

Sicherheitsschalter 3-polig, 400V AC23A, 7.5kW AC22A, 16A Kunststoffgehäuse IP65 Gelb-Roter Wahlschalter

Stromzähler, 3-Phasen, aktive Energie Kl. 1 & B, zugelassen nach: IEC 62052-11, IEC 62053-21, EN 50470-1, EN 50470-3

AF26 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

Residual current circuit breaker with overcurrent protection (RCBO) 3P+N. Tripping: A type 13A Rated Residual Current: 300 mA Terminals: 25mm2 Operating temperature: -25C to +55'C Width: 4 modules 71mmTrigger IndicatorIn the event of a ground fault trigger,a blue flag appears on the shift.This feature helpstroubleshooting and reducing downtime.

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

Auxiliary Contact Block for AF-contactors

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

Frontbedienbarer Schalter-Lasttrennschalter. Typen OT 16...125 enthalten geschützte Klemmen, IP 20.

Technisches Gehäuse - geeignet für alle Arten von elektrischer Steuerung. Die TS-Line ist ein modernes Gehäusesystem, das für die Montage von Geräten zur Verwendung mit Strom-, Wasser- und Heizungsversorgung entwickelt wurde. Die TS-Line wird aus vorverzinkten Stahlplatten hergestellt. Das Gehäuse ist pulverbeschichtet: Farbe RAL 7015. Das Fundament wird als separates Bauteil geliefert und kann daher in einem frühen Stadium der Bauarbeiten eingebaut werden. Die Standardverriegelungsvorrichtung ist dreieckig. TS1000 kann auch mit einem Zylinderriegel montiert werden.